Appendix C IPv6
XGS4600 Series User’s Guide
624
5 Click Start and then OK.
Now your computer can obtain an IPv6 address from a DHCPv6 server.
Example – Enabling IPv6 on Windows 7
Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7
computer.
To enable IPv6 in Windows 7:
1 Select Control Panel > Network and Sharing Center > Local Area Connection.
2 Select the Internet Protocol Version 6 (TCP/IPv6) check box to enable it.
3 Click OK to save the change.
To Next Page
Loading...
