ZyXEL Communications XGS4600 Series - Page 81

Chapter 7 Status
XGS4600 Series User’s Guide
81
Up to 10 neighboring device records per Ethernet port can be retained in this screen even when the
devices are offline. When the maximum number of neighboring device records per Ethernet port is
reached, new device records automatically overwrite existing offline device records, starting with the
oldest existing offline device record first.
Click the Neighbor Detail link in the Status > Neighbor screen to see the following screen.
Figure 62 Status > Neighbor > Neighbor Detail
The following table describes the fields in the above screen.
Table 13 Status > Neighbor > Neighbor Detail
LABEL DESCRIPTION
Local Port This shows the port of the Switch, on which the neighboring device is discovered.
Desc. This shows the port description of the Switch.
Link This shows the speed (either 10M for 10 Mbps, 100M for 100 Mbps, 1G for 1 Gbps, or 10G
for 10 Gbps) and the duplex (F for full duplex or H for half). This field displays Down if the
port is not connected to any device.
Remote
System Name This shows the system name of the neighbor device.
Model This shows the model name of the neighbor device. This field will show “–” for devices that
do not support the ZON utility.
Firmware This shows the firmware version of the neighbor device. This field will show “–” for devices
that do not support the ZON utility.