Figure 12: Recommended Mounting Location and Alignment
If aligning Boreas with the vehicle axes is not possible within vehicle size or shape constraints, it may be
mounted in a different alignment and the alignment offset can be configured 9.1 Using the Web User
Interface or 9.2 Using Boreas Manager.
7.4 Cable Bend Radius
During installation, be mindful that cables must not be flexed beyond their specified bending radius. For
Advanced Navigation supplied cables, these specifications can be found in 6.2.1.1 Cable Bend Radius.
A figure of the bend radius for Advanced Navigation supplied cables is shown below.
v1.2 Page 27 11 Oct 2022
Boreas Reference Manual • Installing Boreas
To Next Page
Loading...
