Figure 48: Boreas Web UI NTRIP Client Page
9.1.3.13 CAN Settings
The CAN Settings page allows you to enable or disable the CAN functionality. If you are only connecting to
Boreas via the primary port then these settings can be ignored.
The default for CAN is Enabled at 1,000,000 baud rate. A CANOpen EDS file is available. Contact Support for a
copy of this file.
Figure 49: Boreas Web UI CAN Settings Page
v1.2 Page 67 11 Oct 2022
Boreas Reference Manual • Configuring and Monitoring Boreas
To Next Page
Loading...
