Figure 56: Setting the Windows Port Latency Value - 2
Figure 57: Setting the Windows Port Latency Value - 3
9.2.4.2 Linux
If serial ports do not show up, the typical reason is a lack of permissions. The user should add themselves to the
dialout group with the command:
sudo adduser username dialout
Compiz causes issues with the 3D mapping. If you are experiencing problems it is recommended to turn off
Compiz.
v1.2 Page 76 11 Oct 2022
Boreas Reference Manual • Configuring and Monitoring Boreas
To Next Page
Loading...
