R3132 Series Spectrum Analyzer Operation Manual
3.3.15 MKR → Key (Marker →)
3-53
3.3.15 MKR → Key (Marker →)
This section describes the menu displayed when the
MKR
→
→→
→ key is pressed. This menu allows you to use
the active marker data (such as frequency and level) as the data for some other function. Item(s) in the
MKR→ menu (1/2) may be different depending on the marker you use (either normal or delta marker).
MKR → CF Sets the active marker frequency as the center frequency.
MKR → Ref Sets the active marker level as the reference level.
Peak → CF Moves the marker to the maximum peak within the search range,
and sets the marker frequency as the center frequency.
Peak → Ref Moves the marker to the maximum peak within the search range,
and sets the marker level as the reference level.
∆MKR → Span Sets the frequency difference between the delta and normal mark-
er as the frequency span.
1/2_more Displays the Mkr → menu (2/2).
MKR → CF Step Sets the marker frequency as the center frequency for the step
size.
∆MKR → CF Step Sets the frequency difference between the delta and normal mark-
er as the step size for the center frequency.
MKR → MKR Step Sets the marker frequency as the step size of the marker.
∆MKR → MKR Step Sets the frequency difference between the delta and normal mark-
er as the step size of the marker.
∆MKR → CF Sets the frequency difference between the delta and normal mark-
er as the center frequency.
2/2_more Returns to the Mkr → menu (1/2).
To Next Page
Loading...
