R3132 Series Spectrum Analyzer Operation Manual
1.7 Calibration
1-15
1.7 Calibration
The R3132 Series requires yearly calibration. Calibration work should be performed at an ADVANTEST
CORPORATION site. Please contact ADVANTEST CORPORATION concerning the calibration.
1.8 Replacing Parts with Limited Life
The R3132 Series uses the following parts with limited life that are not listed in Safety Summary.
Replace the parts listed below after their expected lifespan has expired.
Part name Life
Input attenuator R3132/32N/62: 2 million cycles
R3172/82: 2.5 million cycles
Rotary encoder 100,000 cycle
To Next Page
Loading...
Need help?
General
