R3132 Series Spectrum Analyzer Operation Manual
2.2.6 Tracking Operations
2-32
Figure 2-19 Signal Tracking Screen
6. Press Sig Track ON/OFF(OFF).
Signal tracking is turned off.
Continuous peak search
This function allows you to detect a peak and move the marker to the peak in each
sweep. If the delta marker is being used at that time, the normal marker is displayed
on the peak and the delta marker is displayed the delta frequency away from the peak
(unless the zero span is set).
7. Press Peak Menu and Cont Peak ON/OFF(ON).
The Cont peak search is turned on. A peak is detected in each sweep and the
marker is always moved to that peak even if the input signal frequency varies.
8. Press Cont Peak ON/OFF(OFF).
Continuous peak search is turned off.
To Next Page
Loading...
Need help?
General
