ADVANTEST R3162 User Manual

R3132 Series Spectrum Analyzer Operation Manual
3.3.16 PAS/FAIL Key (Pass/Fail Judgment)
3-54
3.3.16 PAS/FAIL Key (Pass/Fail Judgment)
Pressing the
PAS/FAIL
key displays the Pass/Fail menu.
Pass/Fail ON/OFF Turns the Pass/Fail judgement function, according to the limit
lines, on or off.
ON: A Pass/Fail judgement is made based on the set limit
line.
OFF: Turns the Pass/Fail judgement function off.
Line1 ON/OFF Turns limit line 1 on or off.
ON: Displays limit line 1 and the judgement result (PASS or
FAIL).
OFF: Erases limit line 1 and the judgement result.
Line2 ON/OFF Turns limit line 2 on or off.
ON: Displays limit line 2 and the judgement result (PASS or
FAIL).
OFF: Displays limit line 2 and the judgement result.
X ABS/LFT/CTR Sets the attribute of horizontal axis (frequency or time) data of the
limit line.
ABS: Sets the horizontal axis position using the limit line that
is set under Limit Line Edit as an absolute value. The
horizontal axis position of the limit line moves as the
frequency span or the center frequency setting changes.
LFT: Sets the horizontal axis position using the limit line that
is set under Limit Line Edit as a relative value. The hor-
izontal axis position of the limit line is fixed at the po-
sition based on the left end without being influenced by
changes in frequency span or center frequency.
CTR: Sets the horizontal axis position using the center of the
horizontal axis as a relative value.
Y ABS/TOP/BOT (Y ABS/CTR) Sets the attribute of vertical axis (level) data of the limit line.
ABS: Sets the vertical axis position using the limit line that is
set under Limit Line Edit as an absolute value. The ver-
tical axis position of the limit line moves as the level
setting changes.

ADVANTEST R3162 Specifications

General

Brand	ADVANTEST
Model	R3162
Category	Measuring Instruments
Language	English