R3132 Series Spectrum Analyzer Operation Manual
5.1 General
5-1
5 PERFORMANCE VERIFICATION
5.1 General
(1) Introduction
This chapter provides performance verification procedures item by item as listed in Table 5-1.
Performance verification items for Tracking Generator are listed in Table 5-2.
Table 5-3 lists the performance verification items used for the FM Demodulation.
Table 5-1 Performance Verification Items
: Apply
×: Not Apply
No. Items
Applicable Model
R3132 R3132N R3162 R3172 R3182
1 Reference Oscillator Accuracy
2 CAL OUT Amplitude Accuracy
3 Displayed Average Noise
4 RBW Switching Error
5 RBW Accuracy
6 QP bandwidth
7 IF Gain Uncertainty
8 Attenuator Switching Accuracy
9 Scale Fidelity
10 Residual FM
11 Noise sideband
12 Image, Multiple, Out of Band Response ××
13 Frequency Read Out Accuracy
14 Second Harmonic Distortion
15 Frequency Response
16 Span Accuracy
17 Third Order Intermodulation Distortion
18 Gain Compression
19 Sweep Time Accuracy
20 Residual Response
To Next Page
Loading...
Need help?
General
