14 Installation, Operation, and Maintenance
Symbols
Warnings in the manual or on the instrument must be observed during all
phases of operation, service, and repair of this instrument. Failure to comply
with these precautions violates safety standards of design and the intended
use of the instrument. Agilent Technologies assumes no liability for the
customer’s failure to comply with these requirements.
Technical and environmental specifications
• Indoor use only in ordinary atmospheres
• Altitude up to 4300 m
• Operating ambient temperatures between -5 degrees centigrade and
45 degrees centigrade
• Maximum relative humidity of 80 % for temperatures up to 31 degrees
centigrade decreasing linearly to 50 % relative humidity at 40 degrees
centigrade
• Main supply voltage fluxuations up to ±10% of the nominal voltage
• Pollution degree 2, Installation Cat II
• G2912A is rated for mains connection to 100–120 VAC or 220–240 VAC,
50/60 Hz, 180 VA
See accompanying instructions on page 57 for
more information.
Indicates a hot surface.
Indicates hazardous voltages.
Indicates earth (ground) terminal.
Indicates explosion hazard.
Indicates electrostatic discharge hazard.
To Next Page
Loading...
Need help?
General
