24 Installation, Operation, and Maintenance
Part 1, Installation
1 Introduction to Installation
6890A, 6890 Plus, and 6890N GCs
All three instrument types can be identified by the serial number plates on the
back. There have been no upgrades in this series.
6850A and 6850 Series II GCs
These are tall, narrow single-column instruments. Check the serial number
plate on the left side of the GC to be sure.
G2614A and G2916A trays
The tray model number is on the serial number plate. Older 18596A, B, and C
trays are not compatible.
Injectors
G2913A The serial number label is on the lower back of the injector.
G2613A The serial number label is on the lower front of the injector.
Injector mounting posts
The G2913A injector is supplied with a mounting post for use with 6890 series
GCs.
If installing this injector on a 5890 Series II GC, do not use this mounting post.
A special mounting post that allows this injector to be mounted to a
5890 Series II GC is supplied with the 5890 injector bracket.
To Next Page
Loading...
Need help?
General
