Introduction to Installation 1
Installation, Operation, and Maintenance 21
Part 1, Installation
If using existing 7683A components, they must also be upgraded to the latest
firmware revisions for compatibility with 7683B. See Table 3.
Failure to upgrade firmware will result in unrecognized components, vial
delivery errors, or fewer available features.
If you are using the G2912A ALS Controller, the G2911AA software CD
includes a firmware update utility that provides instructions for updating
devices that do not require chip sets. If you do not have this CD, the firmware
update utility is available on the Agilent Web site at www.agilent.com/chem
(search the site for “firmware”).
For more information, and for the latest available firmware updates and
information, see the Agilent web site at www.agilent.com/chem, or contact
your local Agilent sales representative.
Table 3 Minimum 7683 firmware revisions for 7683B use
GC type Minimum firmware version
required
G2913A Injector A.11.00
G2613A Injector A.10.07
G2614A Tray A.02.00
G2612A ALS controller card for
6890 Plus
A.02.00
G2912A Controller A.02.00
To Next Page
Loading...
Need help?
General
