Installation 2
Installation, Operation, and Maintenance 69
Part 1, Installation
5 Set the GC oven program to 30 °C with a 0 °C/min ramp, a hold time of
0.1 minutes, an equilibrium time of 0.3 minutes, and an initial time of
0.3 minutes.
6 Store, load, then run the sequence.
If there are no faults, the injector will make one injection from the first vial
position.
If problems occur, see “Faults” on page 160, “Error Messages” on page 162,
“Correcting Syringe Problems” on page 175, or “Correcting Sample Vial
Delivery Problems” on page 176.
To Next Page
Loading...
