E Diagnostics quick reference
Jog/Teach tab quick reference
234 Bravo Platform User Guide
Jog and Home Axes areas
The Jog Axes, Multiple Axes, and Home Axes areas contain the following controls
and indicators.
Advanced operation Specifies one of the following options:
• Apply Z-axis teachpoint to all locations. Adjusts
all the location teachpoints using the z-axis
coordinate from the teachpoint at the selected
location.
• Set all teachpoints based upon selected
teachpoint. Applies the saved teachpoint (x-, y-,
and z-axis coordinates) from the selected
Location to all the other deck locations.
• Reset teachpoints to defaults for current head
type. Changes all location teachpoints to the
default coordinates for the selected liquid-
handling head type.
Perform advanced operation Initiates the procedure that you selected in the
Advanced operation list.
Control or indicator Description
Control or indicator Description
Jog Axes area
Aspirate +W,
Dispense –W buttons and
increment (µL) list
Enables you to select the incremental distance (µL)
to move the liquid-handling head, and then move
the head the specified distance in the
w-axis.
Left –X, Right +X,
Back –Y, Forward +Y
buttons and
increment (mm) list
Enables you to select the incremental distance
(mm) to move the liquid-handling head, and then
move the head the specified distance along the
x-
or y-axis.
Up –Z, Down +Z buttons
and
increment (mm) list
Enables you to select the incremental distance
(mm) to move the liquid-handling head, and then
move the head the specified distance along the
z-
axis.
Multiple Axes area
To Next Page
Loading...
Need help?
General
