Alcatel-Lucent 7210 SAS Series User Manual

Service Ingress MAC QoS Policy Match Commands
Page 326 7210 SAS D, E, K OS Quality of Service Guide
inner-dot1p
Syntax inner-dot1p dot1p-value [dot1p-mask]
no inner-dot1p
Context config>qos>sap-ingress>mac-criteria>entry
Description Platforms Supported: 7210 SAS-K.
Configures the Dot1p value to be used as a service ingress QoS policy match criterion to match against the
Dot1p value in the inner tag (the one that follows the outermost tag in the packet) of the received packet.
The no form of this command removes the previously entered dot1p value as the match criteria.
Default no inner-dot1p
Parameters dot1p-value — Specify the Dot1p value to match.
Values [0..7]
dot1p-mask — Specify the mask value to match a range of Dot1p values.
Values [0..7] - accepts decimal hex or binary
inner-tag
Syntax inner-tag value [vid-mask]
no inner-tag
Context config>qos>sap-ingress>mac-criteria>entry
Description Platforms Supported: 7210 SAS-K.
Configures the VLAN value to be used as a service ingress QoS policy match criterion to match against the
VLAN value in the inner tag (the one that follows the outermost tag in the packet) of the received packet.
The no form of this command removes the previously entered VLAN tag value as the match criteria.
Default no inner-tag
Parameters value — Specify the VLAN value to use for the match
Values [0..4095] decimal or [0x0..0xFFF] hex
vid-mask — Specify the mask value to match a range of VLAN values.
Values [1..4095] decimal or [0x1..0xFFF] hex

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English