Operational Commands
7210 SAS D, E, K OS Quality of Service Guide Page 327
outer-dot1p
Syntax outer-dot1p dot1p-value [dot1p-mask]
no outer-dot1p
Context config>qos>sap-ingress>mac-criteria>entry
Description Platforms Supported: 7210 SAS-K.
Configures the Dot1p value to be used as a service ingress QoS policy match criterion to match against the
Dot1p value in the outermost tag of the received packet.
The no form of this command removes the previously entered dot1p value as the match criteria.
Default no outer-dot1p
Parameters dot1p-value — Specify the Dot1p value to match.
Values [0..7]
dot1p-mask — Specify the mask value to match a range of Dot1p values.
Values [0..7] - accepts decimal hex or binary
outer-tag
Syntax outer-tag value [vid-mask]
no outer-tag
Context config>qos>sap-ingress>mac-criteria>entry
Description Platforms Supported: 7210 SAS-K.
Configures the VLAN value to be used as a service ingress QoS policy match criterion to match against the
VLAN value in the outermost tag in the packet of the received packet.
The no form of this command removes the previously entered VLAN tag value as the match criteria.
Default no outer-tag
Parameters value — Specify the VLAN value to use for the match.
Values [0..4095] decimal or [0x0..0xFFF] hex
vid-mask — Specify the mask value to match a range of VLAN values.
Values [1..4095] decimal or [0x1..0xFFF] hex
To Next Page
Loading...
Need help?
General
