EasyManuals Logo

Alcatel-Lucent 7210 SAS Series User Manual

Alcatel-Lucent 7210 SAS Series
488 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #318 background imageLoading...
Page #318 background image
Service Ingress MAC QoS Policy Match Commands
Page 328 7210 SAS D, E, K OS Quality of Service Guide
src-mac
Syntax src-mac ieee-address [ieee-address-mask]
no src-mac
Context config>qos>sap-ingress>mac-criteria>entry
Description This command configures a source MAC address or range to be used as a service ingress QoS policy match
criterion.
The no form of this command removes the source mac as the match criteria.
Default none
Parameters ieee-address — Enter the 48-bit IEEE mac address to be used as a match criterion.
Values HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal digit
ieee-address-mask — This 48-bit mask can be configured using:
This 48 bit mask can be configured using the following formats
To configure all packets with a source MAC OUI value of 00-03-FA are subject to a match condition,
then the entry should be specified as: 003FA000000 0xFFFFFF000000
Default 0xFFFFFFFFFFFF (hex) (exact match)
Values 0x00000000000000 — 0xFFFFFFFFFFFF (hex)
Format Style Format Syntax Example
Decimal
DDDDDDDDDDDDDD 281474959933440
Hexadecimal
0xHHHHHHHHHHHH 0x0FFFFF000000
Binary
0bBBBBBBB...B 0b11110000...B

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent 7210 SAS Series and is the answer not in the manual?

Alcatel-Lucent 7210 SAS Series Specifications

General IconGeneral
BrandAlcatel-Lucent
Model7210 SAS Series
CategorySwitch
LanguageEnglish

Related product manuals