Service Meter QoS Policy Commands
Page 338 7210 SAS D, E, K OS Quality of Service Guide
Sample Output
*A:SAS-E>show>qos# sap-ingress 1 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (1)
-------------------------------------------------------------------------------
UnknownM
Specifies the default unknown unicast forwarding type meters
mapping.
Match Criteria
Specifies an IP or MAC criteria entry for the policy.
Entry
DSCP
Specifies a DiffServ Code Point (DSCP) name used for an
ingress SAP QoS policy match.
FC
Specifies the entry’s forwarding class.
Src MAC
Specifies a source MAC address or range to be used as a Service
Ingress QoS policy match.
Dst MAC
Specifies a destination MAC address or range to be used as a
Service Ingress QoS policy match.
Dot1p
Specifies a IEEE 802.1p value to be used as the match.
Ethernet-type
Specifies an Ethernet type II Ethertype value to be used as a
Service Ingress QoS policy match.
FC
Specifies the entry’s forwarding class.
Service Association
Service-Id
The unique service ID number which identifies the service in the
service domain.
Customer-Id
Specifies the customer ID which identifies the customer to the
service.
SAP
Specifies the a Service Access Point (SAP) within the service
where the SAP ingress policy is applied.
Classifiers
required
Indicates the number of classifiers for a VPLS or Epipe service.
Meters required
Indicates the number of meters for a VPLS or Epipe service.
Label Description (Continued)
To Next Page
Loading...
Need help?
General
