Alcatel-Lucent 7210 SAS Series User Manual

Show Commands
7210 SAS D, E, K OS Quality of Service Guide Page 337
Mode
For 7210 SAS-E: Specifies the configured mode of the meter
(trTcm1 or srTcm). For 7210 SAS-D: Specifies the configured
mode of the meter (trTcm1,trTcm2 or srTcm).
CIR Admin
Specifies the administrative Committed Information Rate (CIR)
parameters for the meters.
CIR Rule
min — The operational CIR for the meters will be equal to or
greater than the administrative rate specified using the rate com-
mand.
max — The operational CIR for the meter will be equal to or
less than the administrative rate specified using the rate com-
mand.
closest — The operational PIR for the meters will be the rate
closest to the rate specified using the rate command without
exceeding the operational PIR.
PIR Admin
Specifies the administrative Peak Information Rate (PIR)
parameters for the meters.
PIR Rule
min — The operational PIR for the meter will be equal to or
greater than the administrative rate specified using the rate com-
mand.
max — The operational PIR for the meters will be equal to or
less than the administrative rate specified using the rate com-
mand.
closest — The operational PIR for the meters will be the rate
closest to the rate specified using the rate command.
CBS
def — Specifies the default CBS value for the meters.
value — Specifies the value to override the default reserved
buffers for the meters.
MBS
def — Specifies the default MBS value.
value — Specifies the value to override the default MBS for
the meter.
UCastM
Specifies the default unicast forwarding type meters mapping.
MCastM
Specifies the overrides for the default multicast forwarding type
meter mapping.
BCastM
Specifies the default broadcast forwarding type meters mapping.
Label Description (Continued)

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English