Alcatel-Lucent 7210 SAS Series User Manual

Service Meter QoS Policy Commands
Page 336 7210 SAS D, E, K OS Quality of Service Guide
Show Commands
sap-ingress
Syntax sap-ingress [policy-id] [detail | association | match-criteria]
Context show>qos
Description This command displays SAP ingress QoS policy information.
Parameters policy-id — Displays information about the specific policy ID.
Default all SAP ingress policies
Values 1 — 65535
detail — Displays detailed policy information including policy associations.
associations- — Displays the policy associations of the sap-ingress policy.
match-criterion- — Displays the match-criterion of the sap-ingress policy.
Sample Output
Show SAP Ingress Output — The following table describes SAP ingress show command output.
Label Description
Policy-Id
The ID that uniquely identifies the policy.
Scope
Exclusive — Implies that this policy can only be applied to a
single SAP.
Template — Implies that this policy can be applied to multiple
SAPs on the router.
Description
A text string that helps identify the policy’s context in the con-
figuration file.
Default FC
Specifies the default forwarding class for the policy.
Criteria-type
IP — Specifies that an IP criteria-based SAP ingress policy is
used to select the appropriate ingress meter and corresponding
forwarding class for matched traffic.
MAC — Specifies that a MAC criteria-based SAP is used to
select the appropriate ingress meters and corresponding for-
warding class for matched traffic.
Meter
Displays the meter ID.

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English