Alcatel-Lucent OmniSwitch 6850-48 - Page 1045

Configuring Server Load Balancing Configuring the Server Farm
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 page 44-19
7 Select Add a new device in the Choose a Hardware Device window.
8 Click the Next button.
9 Select the No option radio button in the Find New Hardware window.
10 Click the Next button.
11 Select the Network adapters option in the Hardware Type window.
12 Click the Next button.
Click “Next” when
done.
Select “Add a new
device.”
Click “Next” when
done.
Select “No” option radio
button.
Click “Next” when
done.
Select Network
Adapters.”