EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6850-48 - Page 1151

Alcatel-Lucent OmniSwitch 6850-48
1162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
OmniSwitch AOS Release 6 Network Configuration Guide September 2009 Index-3
Bridge Protocol Data Units
contents 13-8
bridge slot/port command 13-24
bridge slot/port connection command 13-35
bridge slot/port path cost command 13-32
bridge slot/port priority command 13-30
built-in port groups 40-12
used with Policy Based Routing 40-62
C
clear arp filter command 24-15
clear arp-cache command 24-13
clear ipx route command 33-14
combo ports 1-4
application examples 1-29
configuring 1-21
defaults 1-3
forced copper 1-4
forced fiber 1-4
overview 1-4
preferred copper 1-4
preferred fiber 1-4
condition groups
for ACLs 40-42, 41-8
MAC groups 40-46
network groups 40-43
port groups 40-47
sample configuration 40-42
service groups 40-45
verify information about 40-50
conditions
combined with actions 40-8, 40-9
configuring 40-33
for ACLs 41-9
how to create 40-33
see also condition groups
testing before applying 40-39
valid combinations 40-6
valid combinations for ACLs 41-6
Configuring 802.1AB
application examples 19-3
D
debug messages 46-8
debug qos command 40-19
default route
IP 24-12
IPX 33-7
defaults
10/100/1000 ports 1-3
802.1AB 19-2
802.1Q 21-2
802.1X 37-2
ACLs 39-2, 41-3
assigning ports to VLANs 6-2
authentication servers 35-3
combo ports 1-3
DHCP Relay 31-3
DVMRP 5-2
dynamic link aggregation 23-3
Ethernet OAM 15-2
Ethernet ports 1-2, 1-3
interswitch protocols 20-2
IP 24-3
IPMS 42-4, 42-5
IPv6 26-3
IPX 33-2
Learned Port Security 3-2
mobile ports 6-2
Multiple Spanning Tree 13-5
Network Security 47-2
OSPF 27-3, 30-3
policy servers 38-2
Port Mapping 7-2
port mirroring 45-3
port monitoring 45-5, 45-7
QoS 40-10
RDP 29-2
RDP interface 29-8
RIP 28-2
RMON 45-11
RRSTP 13-5
Server Load Balancing 44-3
source learning 2-2
Spanning Tree Bridge 13-4, 14-2
Spanning Tree Port 13-4
static link aggregation 22-2
switch health 45-13
switch logging 46-3
UDLD 17-2
VLAN rules 8-2
VLANs 4-2
VRRP 32-3
Denial of Service
see DoS
DHCP 31-6
used with 802.1X 37-6
DHCP Relay 31-1, 31-10
application examples 31-4, 31-7, 31-8
authenticated VLANs 31-6
AVLAN forwarding option 31-11
defaults 31-3
DHCP server IP address 31-9
forward delay time 31-10
maximum number of hops 31-11
standard forwarding option 31-11
statistics 31-25
DHCP servers
AV-Client 36-24
for authentication clients 36-29
Telnet authentication clients 36-7
Web browser authentication clients 36-8
DHCP VLAN rules 8-5
directed broadcast 24-23
disposition 41-10
ACLs 41-5, 41-7
global defaults for QoS rules 40-14

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6850-48

Related product manuals