Allied Telesis AlliedWare Plus Installation Guide

Chapter 8: Installing the Switch on a Wall
128

Plywood base if you are installing the switch on a wall with wooden
studs (not provided.) Refer to “Plywood Base for a Wall with
Wooden Studs” on page 125 for illustrations.
 Four screws and anchors for attaching the plywood base to the
wall (not provided)
Caution
The supplied screws and anchors may not be appropriate for all
walls. A qualified building contractor should determine the proper
hardware requirements for your wall prior to installing the
equipment.  E88

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English