Allied Telesis AlliedWare Plus - Chapter 13: Building the Stack with Copper or SFP Gigabit Ports

165
Chapter 13
Building the Stack with Copper or SFP
Gigabit Ports
This chapter explains how to build a stack of x930 Switches using front
panel copper or SFP Gigabit ports as the trunk. The chapter contains the
following sections:
 “Introduction” on page 166
 “Command Summary” on page 167
 “Configuring the Master Switch” on page 170
 “Configuring the Member Switches” on page 177
 “Powering on the Stack” on page 184