Allied Telesis AlliedWare Plus - Figure 50: Tightening the Two Captive Screws on the AT-FAN09 Module; Figure 51: Storing the AT-FAN09 ADP Module in an Anti-Static Bag

x930 Series Installation Guide for Virtual Chassis Stacking
111
12. Tighten the two captive screws on the AT-FAN09 Module to secure it
to the switch. Refer to Figure 50.
Figure 50. Tightening the Two Captive Screws on the AT-FAN09 Module
13. Store the AT-FAN09ADP Module in an anti-static bag and place it in a
safe location. Refer to Figure 51.
Figure 51. Storing the AT-FAN09ADP Module in an Anti-static Bag