Chapter 2: Virtual Chassis Stacking
72
General Stacking Guidelines
Here are additional stacking guidelines:
Stacking is enabled by default on x930 Switches.
VCStack comes standard with the AlliedWare Plus software for
x930 Switches. No additional software or licenses are required.
The switches must all have the same version of AlliedWare Plus
software.
The switches can be the same or different x930 models.
Any x930 Switch can be the master switch of a stack.
A stack of x930 Switches cannot contain other stacking switches,
such as x600 or x610 Switches.
In stacks of three or more switches, all the switches must have the
same number of trunk ports.
Do not configure switch features, such as virtual LANs and routing
protocols, before building the stack. Switches might discard the
settings when the stack is powered on for the first time.
Trunk ports must be directly linked together. There cannot be any
intermediary devices, such as media converters, routers, or other
switches, between trunk ports.
Trunks cannot have different types of trunk ports. For example, a
trunk cannot have both Gigabit copper ports and ports S1 and S2.
To Next Page
Loading...
Need help?
General
