Allied Telesis AlliedWare Plus - Features; X930 Models; 10;100;1000 Mbps Copper Ports; Power over Ethernet

Chapter 1: Overview
22
Features
Here are the switches and their features:
x930 Models Here are the switches in the x930 Series:
 AT-x930-28GTX
 AT-x930-28GPX
 AT-x930-28GSTX
 AT-x930-52GTX
 AT-x930-52GPX
10/100/1000
Mbps Copper
Ports
Here are the basic features of the 10/100/1000 Mbps copper ports:
 24 or 48 ports per switch
 10Base-T, 100Base-TX, and 1000Base-T compliant
 IEEE 802.3u Auto-Negotiation compliant
 Auto-MDI/MDIX
 100 meters (328 feet) maximum operating distance
 IEEE 802.3x flow control in 10/100Base-TX full-duplex mode
 IEEE 802.3x backpressure in 10/100Base-TX half-duplex mode
 IEEE 802.3ab 1000Base-T
 Layer 2 and Layer 3 jumbo frames up to 13KB and 9KB,
respectively
 RJ-45 connectors
Power Over
Ethernet
Here are the basic features of Power over Ethernet (PoE) on the copper
ports on the AT-x930-28GPX and AT-x930-52GPX Switches:
 Supported on ports 1 to 24 on the AT-x930-28GPX Switch and
ports 1 to 48 on the AT-x930-52GPX Switch
 Supports PoE (15.4 watts maximum) and PoE+ (30 watts
maximum) at the switch ports
 Supports powered device classes 0 to 4
 Port prioritization
 Mode A wiring