Allied Telesis AlliedWare Plus - Chapter 1: Overview; Models; Table 1: Models and Basic Features

Chapter 1: Overview
18
Models
Table 1 lists the models and basic features of the x930 Series of stackable
Gigabit Layer 3 switches.
Additional information is listed here:
 The switches do not come with power supplies. Power supplies
must be ordered separately. For more information, refer to “Power
Supplies” on page 27.
 The power budgets of the AT-x930-28GPX and AT-x930-52GPX
Switches for PoE+ powered devices depend on the number and
types of power supplies installed in the units. For more information,
refer to “Power Budget” on page 34.
 You may use the VCStack feature to stack the switches with the
S1 and S2 ports, the optional AT-StackQS card, or the 10/100/
1000Mbps front panel ports. For more information, refer to Chapter
2, “Virtual Chassis Stacking” on page 57.
 The copper ports and SFP ports on AT-x930-28GSTX Switch are
paired together. Only one port in a pair can be operational at a
time. For more information, refer to “SFP Ports” on page 38.
Table 1. Models and Basic Features
Model
10/100/
1000Mbps
Copper
Ports
100/
1000Mbps
SFP Ports
1000Mbps/
10GbE
SFP+ Ports
PoE+ VCStack
AT-x930-28GTX 24 0 4 No Yes
AT-x930-28GPX 24 0 4 Yes Yes
AT-x930-28GSTX 24 24 4 No Yes
AT-x930-52GTX 48 0 4 No Yes
AT-x930-52GPX 48 0 4 Yes Yes