x930 Series Installation Guide for Virtual Chassis Stacking
27
Power Supplies
Here are the five power supplies for the x930 Switches:
AT-PWR150
AT-PWR250
AT-PWR250-80
AT-PWR800
AT-PWR1200
System-Only
Power Supplies
The AT-PWR150, AT-PWR250, and AT-PWR250-80 Power Supplies are
shown in Figure 6. They provide system power only. They are primarily
intended for the non-PoE AT-x930-28GTX, AT-x930-28GSTX, and AT-
x930-52GTX Switches. The AT-x930-28GTX and AT-x930-28GSTX
Power Supplies have AC connectors. The AT-PWR250-80 Power Supply
has a DC connector for DC wiring environments.
Figure 6. AT-PWR150, AT-PWR250, and AT-PWR250-80 Power Supplies
Here are the operating characteristics:
The power supplies provide system power only. They do not
support PoE+ devices.
A single power supply can power an entire switch.
To Next Page
Loading...
Need help?
General
