Allied Telesis AlliedWare Plus - Figure 9: Leds for the 10;100;1000 Base-T Ports on the AT-X930-28 GPX and AT-X930-52 GPX Switches; Table 8: Leds on the 10;100;1000 Base-T Ports on the AT-X930-28 GPX and AT-X930-52 GPX Switches

x930 Series Installation Guide for Virtual Chassis Stacking
45
Figure 9. LEDs for the 10/100/1000Base-T Ports on the AT-x930-28GPX
and AT-x930-52GPX Switches
The LEDs are described in Table 8.
Table 8. LEDs on the 10/100/1000Base-T Ports on the AT-x930-28GPX
and AT-x930-52GPX Switches
LED State Description
Link/
Activity
LED
Solid Green A port has established a 1000 Mbps link to
a network device.
Flashing
Green
A port is transmitting or receiving data at
1000 Mbps.
Solid Amber A port has established a 10 or 100 Mbps
link to a network device.
Flashing
Amber
A port is transmitting or receiving data at 10
or 100 Mbps.
Off A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
Link/Activity
LED
PoE
LED
PoE
LED
Link/Activity
LED