2
ML-5120A
How to Use This Document
Thank you for purchasing our Direct Diode Laser ML-5120A.
This operation manual explains its method of operation and precautions for use.
Before using, read this operation manual carefully; after reading, save it in a proper
place for your future reference.
This document is composed of the 4 parts of "Introduction Part", "Installation and
Preparation Part", "Operating Part", and "Maintenance Part", and "Appendixes."
We recommend inexperienced users to read through the whole contents starting from
"Introduction Part."
This document allows the user to understand the whole equipment image, basic
conguration, and how to use the laser.
Experienced users can refer to the desired page from the table of contents.
Organization of This Document and Its Contents
Introduction Part:
Explains the outline and functions of the laser. Regarding the
Direct Diode Laser, this part explains the basic configuration and
functional outline of this product including options so that the user
can know the conguration of the laser and equipment composition,
and also the name and function of each component section.
Installation and
Preparation Part:
Explains the installation of the laser and preparatory operations
such as connections of its respective sections.
Operating Part:
Explains how to operate the laser processing. First, this part
explains how to perform each setting and how to operate the laser.
Three types of control (Control by the laser controller, control by
external input/output signals, and control by external communication
control) are explained in the operating method for laser processing.
Maintenance Part:
Explains how to perform maintenance and how to handle trouble.
Appendixes:
For reference materials, specications, dimensional outline drawing,
timing chart, and list of terminology are available. In the output
schedule data entry table, the user can enter registered laser output
schedule data for use.
To Next Page
Loading...
Need help?
General