3. Changing the Equipment Settings
77
ML-5120A
Chapter 2 Various Settings
Introduction Part
Installation and
Preparation Part
Operating Part Maintenance Part Appendixes
RS-485 COMMUNICATION SETUP
How to see the displayed items
: Settable item
NETWORK
Sets the equipment No. in the range of #0 to #15 to perform remote operations by
using the external communication function.
BAUD
RATE
Sets the communication speed from 9600, 19200, 38400, 57600, or 115200 bps.
DATA BIT
Sets the length of data bit from 8bit or 7bit.
PARITY
Sets the parity mode from NONE, EVEN or ODD.
STOP BIT
Sets the stop bit from 2bit or 1bit.
X
Returns to the CONFIG screen.
To Next Page
Loading...
Need help?
General