Amsco 110LS - Too Long in Step

6-64
387366-389 Operator Manual Sterilizer Operation
6.20.8 Too Long In Step From Supervisors Mode Screen (Screen 600), press TOO LONG IN
STEP to view Set Too Long In ... Screen (Screen 641).
2. If applicable, press RIGHT ARROW button to access additional
parameters. Following screen appears:
3. For applicable parameter, press time section of associated button,
for example, Air Break button.
4. On resulting numeric keypad display, enter new time value and
press ENTER.
The new value is shown on screen, in place of previous value.