Amsco 110LS - Jacket or Generator Charge Phase Delay; Out of Cycle Jacket Temperature

6-70
387366-389 Operator Manual Sterilizer Operation
6.20.13 Jacket or Generator
Charge Phase Delay
Jacket or Generator Charge Phase Delay is used to set a delay time
such that after a cycle is started, if the jacket is not up to temperature
for the time set, the jacket charge phase will continue for set delay time.
6.20.14 Out of Cycle Jacket
Temperature
Out of Cycle Jacket Temperature is maintained jacket temperature
when out of cycle, unless Green Mode (see S
ECTION 6.20.16, GREEN
MODE) is in effect. After a liquid cycle, the jacket remains off until the
door is closed.