6-69
Sterilizer Operation Operator Manual 387366-389
Shutdown times are set on Page 3 of 3.
Default settings are for restart at 6 am and shutdown at 5 pm.
UTILITY SHUTDOWN occurs on any screen except for:
• UTILITY SHUTDOWN setup screens
• Cycle, excluding the complete phase.
When shutdown time is reached, a screen similar to shown Utility
Shutdown Screen (Screen 132) appears, showing Shutdown and
Restart times.
NOTE: Pressing the CANCEL button restarts utilities to run a cycle or
another operation. After the cycle is complete, utilities shutdown, as
long as the restart time has not been reached.
To Next Page
Loading...
