6-71
Sterilizer Operation Operator Manual 387366-389
6.20.15 Waste Temperature The WASTE TEMP. button is used to adjust Waste Temperature
setpoint to a value within range of 40-60°C (104-140°F).
6.20.16 Green Mode When sterilizer is out of cycle, Green Mode turns jacket off after a
programmed time. Setting a value of 0 for both hours and minutes
disables Green Mode.
6.20.17 Special Cycles Continuous Cycles
Cycles can be setup to run continuous. The number of continuous
cycles and the hold time can be set. The continuous can be ENABLED
or DISABLED.
To Next Page