6-77
Sterilizer Operation Operator Manual 387366-389
The following parameters are not included in Healthcare Gravity cycle
but are included in Life Science Gravity cycle.
Vacuum Dry
Jacket Temperature
Sterilize Control (set to Drain)
Cycle Operation
When Healthcare Gravity cycle is started, the following will be shown.
Screen will indicate that it is a Healthcare cycle. It will also indicate
that it is Not for Patient Use. Press Gravity icon to run Health Care
Gravity cycle.
6.20.19 Rates Used to enable or disable rates for Charge, Exhaust and Evacuate.
The enabling (disabling) of the rates are independent; for example,
Charge Rate can be enabled while Exhaust and Evacuate rates are
disabled.
To Next Page
Loading...
