6-90
387366-389 Operator Manual Sterilizer Operation
Wireless Ethernet
For the Sterilizer to utilize the email alert system, the Sterilizer needs
to be connected to the facility's Ethernet. There are two ways to connect
to the Ethernet: an Ethernet cable from the display to the building's
Ethernet port, or it can be connected wireless if the building has an
active wireless network.
This section explains how to connect to an active wireless network. In
both methods, the Sterilizer needs to access an available email server.
This needs to be verified and the settings made on the Sterilizer display.
Setup the Ethernet Adapter as follows:
1. Customer must supply an Ethernet adapter. Other Ethernet
adapters may work, but the Ethernet adapter chosen for this
description is a Universal Wi-Fi N Adapter from IOGEAR (model
number GWU627).
2. Verify Ethernet adapter encryption method is same as facility's
encryption method. WEP, TKIP, AES, WPA and WPA2 are
provided with this model number.
3. Connect adapter to a computer (see F
IGURE 6-5). USB port on
adapter is plugged into a USB port on computer and Ethernet
port on adapter is plugged into Ethernet port on computer.
To Next Page
Loading...
