Anritsu MT8801C - Page 197

Section 4 Operation
4-142
• Function keys on the Save Parameter screen
Main function key: None
Save function keys:
[Display Dir.] F8: Accesses the floppy disk and displays the directory of the parameter data file.
The low-order Save menu appears.
[Previous Page] F7: Displays the previous page of the directory.
[Display Dir./Next Page] F8: Accesses the floppy disk and displays the next page of the directory.
[File No.] F9: Opens the window for entering the save position (number) of the setup param-
eter data file.
0 to 99, Resolution: 1, Initial value: 0
[File Name] F10: Opens the window for entering the name of the parameter data file to be saved.
The data file name consists of up to eight characters.
[Write Protect] F11: Write-protects the specified parameter data file.
An asterisk (*) is displayed at the end of the name of the write-protected file.
If the specified parameter data file is already write-protected, this key cancels
write protect.
Note:
This function can only be executed through panel operation.
Displays the previous screen.
[File No.] F9: Opens the window for entering the save position (number) of the setup parameter data
file.
0 to 99, Resolution: 1, initial value: 0
[return] F12: Returns to the previous menu.