Anritsu MT8801C - 2.5.9 Call Processing Commands

2-41
2.5.9 Call Processing commands
(1) Setup Call Processing Parameters screen commands
• Setup Call Processing screen commands are valid at all the screens of the TX/RX
measurement screens (screens under the Setup Common Parameter screen).
Code Paging Channel Walsh Code PWALSH n PWALSH? n n:1 to 7
Traffic Channel Walsh Code TWALSH n TWALSH? n n:8 to 31, 33 to 63
OCNS Channel Walsh Code OWALSH n OWALSH? n n:1 to 31, 33 to 63
Synch Channel & SID CTRLSID n CTRLSID? n n:0 to 32767
Paging Channel Message
Register SID CTRLREGSID n CTRLREGSID? n n:0 to 32767
NID CTRLNID n CTRLNID? n n:0 to 65535
Register NID CTRLREGNID n CTRLREGNID? n n:0 to 65534
BASE_ID CTRLBID n CTRLBID? n n:0 to 65535
Slot Cycle Index SLOTINDEX n SLOTINDEX? n n:0 to 7
Default ESN DEFESN h DEFESN? h h:00000000 to FFFFFFFF
Default MSID (IDT, MSID) DEFMSID d1, d2 DEFMSID? d1, d2 *1
IDT MSIN IDT d1 IDT? d1
Notation
NOTATION DEC NOTATION? DEC
NOTATION HEX NOTATION? HEX
MSID MSID d2 MSID? d2
Analog Channel ACCH DCC CTRLDCC n CTRLDCC? n n:0 to 2
Parameters SCC (SAT Color Code) SATCC n SATCC? n n:0 to 2
DSAT Sequence DSAT n DSAT? n n:0 to 6
FM
AOPF MOD AOPF? MOD
AF Osc. Output to
mod.
Off AOPF OFF AOPF? OFF
Tone ASIG TONE ASIG? TONE
Noise
AF Osc. Signal
(ITU-T ASIG G227 ASIG? G227
G.227)
Noise
ASIG WHITE ASIG? WHITE
(White)
Frequency AFREQ f AFREQ? f [Hz/0.1Hz]
Deviation ADEV f ADEV? f [Hz/0.1Hz]
*1 Meaning of response Data (DEC)
d1 : IDT d2 : MSID
2 → MSIN 0000000000 to 9999999999
Meaning of response Data (HEX)
d1 : IDT d2 : MSID
2 → MSIN 000000000 to 3FFFFFFFF
RemarksQuery Msg
Intermediate
class
Function Program Msg
Response
Msg
Function
details
2.5 Device Message List