Anritsu MT8801C - Response Message Format

Section 4 Device Message Format
4-6
4.3 Response Message Format
To transfer responses messages from the MT8801C to the controller by using the
INPUT statement, the response message formats are defined as follows:
RESPONSE MESSAGE
TERMINATOR
RESPONSE MESSAGE
(1) RESPONSE MESSAGE TERMINATOR
EOINL
NL
CR
The response message terminator to be used depends on the TRM command.
(2) RESPONSE MESSAGE
;
RESPONSE MESSAGE UNIT
When a query is sent by the PRINT statement with one or more program queries,
the response message also consists of one or more response message units.
(3) Normal RESPONSE MESSAGE UNIT
SP
,
RESPONSE DATARESPONSE HEADER