Anritsu MT8801C - GPIB Specifications

1-5
1.5 GPIB Specifications
1.5 GPIB Specifications
The GPIB of the MT8801C provides the IEEE488.1 interface function subsets listed
in the table below.
GPIB Interface Functions
Code Interface function
SH1
All source handshake functions are provided.
Synchronizes the timing of data transmission.
AH1
All acceptor handshake functions are provided.
Synchronizes the timing for receiving data.
T6
Synchronizes the timing for receiving data.
The serial poll function is provided.
The talk-only function is not provided.
The talker can be canceled by MLA.
L4
Basic listener functions are provided.
The listen-only function is not provided.
The listener can be canceled by MTA.
SR1 All service request and status byte functions are provided.
RL1
All remote/local functions are provided.
The local lockout function is provided.
PP0 Parallel poll functions are not provided.
DC1 All device clear functions are provided.
DT1 The device trigger function is provided.
C0 Controller functions are not provided.