Section 1 General
1-2
1.1 General Description
The MT8801C Radio Communication Analyzer, when combined with an external
controller, can automate your measurement system. For this purpose, the MT8801C
is equipped with an RS-232C interface port and a GPIB interface bus (IEEE Std
488.2-1987) as a standard feature.
1.2 Remote Control Functions
The Remote Control functions of the MT8801C are as follows:
(1) Controls all functions except the power switch, floppy disk unloading, and some
keys including the [Local] key
(2) Reads out all setting conditions
(3) Sets the RS-232C interface conditions and GPIB address from the panel
(4) Executes interrupts and serial polling
These functions enable to configure the automatic measurement system when the
MT8801C is combined with a personal computer and other measuring instruments
To Next Page
Loading...
