Anritsu MT8801C - Device Initialization by the PRE;INI;IP Command

Section 6 Initial Settings
6-6
6.5 Device Initialization by the PRE/INI/IP Command
■ Syntax
PRE
INI
IP
■ Example (program message)
Call ibwrt(ud%,"PRE"):
Initializes the device (MT8801C) whose address is 1 with level 3.
■ Explanation
The PRE, INI and IP commands are MT8801C device-dependent messages which
initialize a device with level 3.
Refer to the separate Operation Manual Vol. 1 Appendix B for details of items initial-
ized by the PRE, INI, and IP commands and initial values.