Anritsu MT8801C - Page 284

A-3
Appendix A Screen and Function Key Transition Diagrams
Modulation Analysis screen
(Analysis screen)
Occupied Bandwidth screen
(Occupied bandwidth measurement)
Power Meter screen
(Power measurement)
Setup TX Measure Parameter screen
(TX measurement parameter setup)
Setup Template screen
(Templete parameter setup)
<F7>Recall Templete Recall Templete screen
<F8>Save Templete Save Templete screen
Spurious close to the Carrier screen
(Spurious close to the carrier measurement)
Spurious Emission screen
(Spurious measurement)
Analog TX Meas with SG screen
(Signal generator + Analog TX measurement)
Setup Analog TX Measure Parameter screen
(Analog TX measurement parameter setup)
Access Probe Measure screen
(Access Probe output power measurement)
Standby Output Power screen
(Standby Output Power measurement)
Occupied Bandwidth screen
(Occupied bandwidth measurement)
Power Meter screen
(Power measurement)
Setup TX Measure Parameter screen
(TX measurement parameter setup)
Setup Template screen
(Templete parameter setup)
<F7>Recall Templete Recall Templete screen
<F8>Save Templete Save Templete screen
Spurious close to the Carrier screen
(Spurious close to the carrier measurement)
Spurious Emission screen
(Spurious measurement)
Setup Analog TX Measure Parameter screen
(Analog TX measurement parameter setup)
Modulation Analysis screen
(Analysis screen)
RF Power screen
(Gated output power measurement)
Open Loop Time Response screen
(Open Loop Power Control Time Response measurement)
Occupied Bandwidth screen
(Occupied bandwidth measurement)
Power Meter screen
(Power measurement)
Setup TX Measure Parameter screen
(TX measurement parameter setup screen)
Setup Template screen
(Templete parameter setup screen)
<F7>Recall Templete Recall Templete screen
<F8>Save Templete Save Templete screen
Spurious close to the Carrier screen
(Spurious close to the carrier measurement)
Spurious Emission screen
(Spurious measurement)
Analog TX Meas with SG screen
(Signal generator + Analog TX measurement)
Setup Analog TX Measure Parameter screen
(Analog TX measurement parameter setup)
<F1>TX Measure
TX Measure
(Call Proc.: Stop, CDMA)
TX Measure
(Call Proc.: Stop, Analog)
TX Measure
(Call Proc.: Idle, CDMA)
TX Measure
(Call Proc.: Idle, Analog)
TX Measure
(Call Proc.: Loop Back, Conversation, CDMA)
TX Measure
(Call Proc.: Conversation, Analog)
<F8>Modulation Analysis
<F11>Occupied Bandwidth
<F12>Power Meter
↑ The Next Menu key [ ] can be
↓ used to scroll the screen vertically.
<F9>Setup TX Parameter
<F10>Setup RF Power Template
<F11>Spurious close to the Carrier
<F12>Spurious Emission
<F10>Analog TX Meas with SG
↑ The Next Menu key [ ] can be
↓ used to scroll the screen vertically.
<F9>Setup Analog TX Parameter
<F8>Access Probe Measure
<F9>Standby Output Power
<F11>Occupied Bandwidth
<F12>Power Meter
↑ The Next Menu key [ ] can be
↓ used to scroll the screen vertically.
<F9>Setup TX Parameter
<F10>Setup RF Power Template
<F11>Spurious close to the Carrier
<F12>Spurious Emission
<F9>Setup Analog TX Parameter
<F8>Modulation Analysis
<F9>RF Power
<F10>Open Loop Power Cont.
<F11>Occupied Bandwidth
<F12>Power Meter
↑ The Next Menu key [ ] can be
↓ used to scroll the screen vertically.
<F9>Setup TX Parameter
<F10>Setup RF Power Template
<F11>Spurious close to the Carrier
<F12>Spurious Emission
<F10>Analog TX Measure with SG
↑ The Next Menu key [ ] can be
↓ used to scroll the screen vertically.
<F9>Setup Analog TX Parameter
TX & RX Tester
(Setup Common Parameter screen)