Anritsu MT8801C - Page 364

2-39
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RF Level RX Measure OLVL DBM OLVL? [dBm/0.1dB]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Output Level OLVL DBU OLVL? [dBµ/0.1dB]
OLVL OLVL?
Incremental Step Value LINC LINC? [dB / 0.1dB]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RF Level Step Up OLS UP --- ---
UOL --- ---
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RF Level Step Down OLS DN --- ---
DOL --- ---
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Unit EMF/TERM EMF RFUT EMF RFUT? EMF
TERM RFUT TERM RFUT? TERM
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RF Level Rel. On/Off On OLVLRL ON OLVLRL? ON
Off OLVLRL OFF OLVLRL? OFF
Relative Value --- OLVLRLV? [dB / 0.1dB]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RF Level On/Off On RRLVL ON RRLVL? ON
Off RRLVL OFF RRLVL? OFF
AF Oscillator 1 Frequency AFREQ1 f AFREQ1? f[Hz / 0.1Hz]
(Mod.)
Deviation ADEV1 f ADEV1? f[Hz / 0.1Hz]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Oscillator Switch On AOUT1 ON AOUT1? ON
Off AOUT1 OFF AOUT1? OFF
AF Oscillator 2 Frequency AFREQ2 f AFREQ2? f[Hz / 0.1Hz]
(Mod./AF)
Deviation ADEV2 f ADEV2? f[Hz / 0.1Hz]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Level ALVL2 vV(V,MV,UV) ALVL2? V v[V / 1µV]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
ALVL2 DBM ALVL2? DBM [dBm / 0.1dB]
ALVL2 (or ALVL2 v) ALVL2? (or v)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Signal Tone ASIG2 TONE ASIG2? TONE
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Noise(ITU-T G.227) ASIG2 G227 ASIG2? G227
Noise(White) ASIG2 WHITE ASIG2? WHITE
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Output For Mod/AF Mod. AOPF2 MOD AOPF2? MOD
AF AOPF2 AF AOPF2? AF
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Oscillator Switch On AOUT2 ON AOUT2? ON
Off AOUT2 OFF AOUT2? OFF
External Oscillator Deviation ADEVX f ADEVX? f[Hz / 0.1Hz]
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
(Mod.)
Oscillator Switch On AOUTX ON AOUTX? ON
Off AOUTX OFF AOUTX? OFF
Intermediate
class
Function Function details
Program Msg Query Msg
Response
Msg
Remarks
Specifies the input level
with dBm unit.
Specifies the input level
with dBu unit.
Specifies the input level
with current selected unit.
Specifies the input/output level
with V unit.
Specifies the input/output level
with dBm unit.
Specifies the input/output level
with current selected unit.
Unit can be changed
by inputing the set
value with a
character string of
unit.
2.5 Device Message List