EasyManua.ls Logo

AOR AR5001D - 4 ADDITIONAL SETTINGS; 4-1 AGC (AUTOMATIC GAIN CONTROL); 4-2 ATTENUATOR; RF AMPLIFIER; 4-3 RF GAIN

AOR AR5001D
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Built-in AFC (Automatic Frequency Control)
AM (Amplitude Modulation)
Envelope Detection (Normal AM decoder)
Synchronous Detection
1. DSB (Double Side Band) synchronous
2. SSB (Single Side Band) USB/LSB (Upper Side Band/Lower Side Band)
selectable synchronous
AGC (Automatic Gain Control) mode/Manual RF gain mode
SSB (Single Side Band)
USB/LSB selectable
AGC mode/Manual RF gain mode
ISB (Independent Side Band)
Simultaneously decoded LSB and USB (Stereo Output)
AGC mode/Manual RF gain mode
CW (Continuous Wav e)
Built-in narrow band IF filter 200 Hz/500 Hz
Adjustable tone pitch 300 ~ 1100 Hz (50 Hz step)
NB (Noise Blanker)
Operates in AM, SSB, and ISB modes
Auto Notch Filter
Effective to suppress a cyclic noise signal.
IF Shift
Operates in SSB, AM, and CW mode.
Shift width: -1200 Hz ~ +1200 Hz (50 Hz step)
Selectable Squelch mode
VSQ (Voice Squelch) or LSQ (Level Squelch) can be selected.
DVR (Digital Voice Recorder)
Received audio can be recorded on a SD memory card in WAV format.
Analog output for DRM® (Digital Radio Mondiale)
12 kHz IF (I/Q) analog output for DRM® PC receiver

Table of Contents

Other manuals for AOR AR5001D

Related product manuals