AOR AR5001D - Configure Write to SD

66
3. Press the [FUNC] key, and then press the [kHz] key.
4. When the configuration menu is displayed, press the [DOWN] key seven times to select “SD INFO”
in reverse contrast.
5. Press the [MHz] key.
6. A sub screen will appear and d isplay information showing total availa ble rec ording time and the total
size of the SD memory card.
7. Press the [MHz] key to exit from this screen.
8. Press the [CLR] key to exit the configuration me nu.
9-9 CONFIGURE WRITE TO SD
To write memory channel or search bank contents to the SD memory card, perform the following steps:
1. Insert a SD memory card with a printed label upward facing the slot on the front panel until you can
hear a click.
2. Wait until “SD” appears o n the top of the LCD.
3. Press the [FUNC] key, and then press the [kHz] key.
4. When the configuration menu is displayed , press the [DOWN] key eight times to select “WRITE TO SD”
in reverse contrast.