AOR AR5001D - 5-2 MULTI CHANNEL RECEIVE; 5-2-1 DUAL CHANNEL RECEIVE IN OFFSET MODE; 5-2-1-1 ACTIVATING DUAL CHANNEL IN OFFSET MODE

14
2-3 LCD DISPLAY
Frequency display mode
Band scope mode
Icon
Function
F Function switch
O Dual channel receive (offset mode)
D Dual band receive (HF and V/U)
GPS status (optional)
Lit: Frequency reference 0.01 ppm
Blink: Frequency reference 0.1 ppm
Not lit: No GPS installed
Key lock/Remote control mode
ALARM Alarm function activated
SLEEP
Sleep function activated
REC SD card status (REC: Recording, SD: Card detected)
PRIO Priority function activated
ANT Antenna input
B
Busy (Squelch open)
-120. 0dB S reading / Antenna input level (in dBm when amplifier is off.)
ATT Attenuation level
AMP RF amplifier on
AUTO
Auto receive mode
ST: 009.000k Frequency step
L-BANK Bank link
VFO Operation mode (VFO, MEM, SCAN, S.SCAN, SRCH, CYBER)
PAUSE
Scan/Search pause
VCS Voice scan mode
PASS Frequency pass
AS-M Auto memory store function activated
DCS
DCS (Digital Code Squelch) function activated
TONE CTCSS function activated
STEP-ADJ Step adjust function activated
145.000000 Receiving frequency
=
AGC off
BW 15k IF bandwidth
FM Receive mode
VA VFO, channel number
SPAN FFT display span (0.4 ~ 10.0 MHz)
Audio balance (displayed in offset mode, dual band receive mode)